Requires your own/not included
Radio – Minimum 6 channels.
Receiver – Minimum 6 channels.
Battery : 6S 3500mAh – 7800mAh *recommended ( Default connector in plane is XT60)
Charger : supports up to 6S LiPo charging
Camera & VTX if applicable
Introducing the T2 Cruza VTOL PNP – pre-assembled with ease of assembly in mind. In less than a minute, attach your own remote control and battery for an instant flight experience. With vertical take-off, enjoy a carefree and thrilling flying adventure.
Length: 1110mm
Wing Span: 1200mm
Motor: 3110 x 3
ESC: HEEWING 6S BLS x 3
Servo: HEEWING M32 Metal digital × 4
Tilt Servo: HEEWING V95-S Metal digital ×2
Propeller : 1060 Glass Fiber
Takeoff Weight: 2000g~3500g
Battery (excl) : 6s Li-po (Flight time: 15~20mins)
Note: Keep altitude under 50 meters and avoid Beyond Visual Line of Sight flight.
Please refer to the factory settings requirements. It is not recommended to modify or overload any personal equipment. All consequences of modifications are the user’s own responsibility. Please strictly abide by local laws and regulations in your area and fly in compliance and safe.
Note
– to ensure a great first experience with your T2 VTOL PNP, please read all manual carefully before flight, PNP version comes motor,servo and ESC, but requires your own radio, receiver, battery, charger,stabilizer and etc. you need for your flight.
What’s included
T2 VTOL – PNP
– Preinstalled 2x FX-3110_680KV Tilt Motor, 1x FX-3110_680KV Rear Motor, 3x FX-25A ESC, 4x M-32 MG Metal Gear Servo, 2x V95S Metal Gear Tilt Servo, 3x 1060 propellers, Quick Release Wiring Plug for the Main Wings, and your choice of whether to have Flight controller included.
*Options
a. PNP without FX-405 ardupilot stabilizer
b. PNP45 with FX-405 ardupilot stabilizer – Preinstalled
Reviews
There are no reviews yet.